Dodge Ram 3500 (DR) 2003-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Ram 3500 built from 2003 to 2008 (ST, SLT, Laramie).

Fitment specs

Bolt pattern8X165.1
Center bore121.3 mm
Lug thread9/16"-18UNF
Model years2003-2008
GenerationDR

Every 2003-2008 Dodge Ram 3500 uses a 8X165.1 bolt pattern with a 121.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 121.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 9/16"-18UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Ram 3500 (DR) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYears
ST2003-2008
SLT2003-2008
Laramie2003-2008

Factory wheel sizes

Wheel sizes Dodge fitted to the 2003-2008 Dodge Ram 3500 from the factory. Offsets are ET in millimeters.

Factory size
17x6 +136
17x7.5 +45
17x8 +43
18x7.5 +45
18x8 +40
18x8 +43
18x8 +45
18x8.5 +35
19x8 +40
19x8.5 +35
19x9 +30
20x8 +55
20x9 +30
20x9 +35
20x9 +45
20x9.5 +25
22x10 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2003-2008 Dodge Ram 3500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-19"6"+9 to +75
17-19"6.5"+15 to +75
17-19"7"+21 to +75
17-19"7.5"+28 to +75
17-19"8"+34 to +75
17-19"8.5"+41 to +75

Wider still: 17x9 +26 to +75; 17x9.5 +33 to +75; 18x9 +26 to +75; 18x9.5 +33 to +75; 19x9 +26 to +75; 19x9.5 +33 to +75 fit with modifications (2 in front leveling kit for 35 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2003-2008 Dodge Ram 3500?

The 2003-2008 Dodge Ram 3500 (DR) uses a 8X165.1 bolt pattern and a 121.3 mm center bore.

What size wheels came on the 2003-2008 Dodge Ram 3500 from the factory?

Factory sizes: 17x6 +136; 17x7.5 +45; 17x8 +43; 18x7.5 +45; 18x8 +40; 18x8 +43; 18x8 +45; 18x8.5 +35; 19x8 +40; 19x8.5 +35; 19x9 +30; 20x8 +55; 20x9 +30; 20x9 +35; 20x9 +45; 20x9.5 +25; 22x10 +20.

What lug thread size does the 2003-2008 Dodge Ram 3500 use?

Its wheel fasteners use a 9/16"-18UNF thread.

What aftermarket wheel sizes fit the 2003-2008 Dodge Ram 3500 without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.