Dodge Ram 3500 (DR) 2009 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Dodge Ram 3500 built from 2009 to 2009 (ST, SLT, Laramie).

Fitment specs

Bolt pattern8X165.1
Center bore121.3 mm
Lug thread9/16"-18UNF
Model years2009
GenerationDR

Every 2009 Dodge Ram 3500 uses a 8X165.1 bolt pattern with a 121.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 121.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 9/16"-18UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Ram 3500 (DR) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYears
ST2009
SLT2009
Laramie2009

Factory wheel sizes

Wheel sizes Dodge fitted to the 2009 Dodge Ram 3500 from the factory. Offsets are ET in millimeters.

Factory size
17x6 +136
18x8 +43
20x8 +55
20x9 +45
22x9 +45

FAQ

What is the bolt pattern of the 2009 Dodge Ram 3500?

The 2009 Dodge Ram 3500 (DR) uses a 8X165.1 bolt pattern and a 121.3 mm center bore.

What size wheels came on the 2009 Dodge Ram 3500 from the factory?

Factory sizes: 17x6 +136; 18x8 +43; 20x8 +55; 20x9 +45; 22x9 +45.

What lug thread size does the 2009 Dodge Ram 3500 use?

Its wheel fasteners use a 9/16"-18UNF thread.