Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Bronco built from 2021 to 2026 (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage Edition, Heritage Limited, Raptor, First Edition, Stroppe Edition).
Every 2021-2026 Ford Bronco uses a 6X139.7 bolt pattern with a 93.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 93.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Bronco (U725) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2021-2026 | 16x7 +55 |
| Big Bend | 2021-2026 | 17x7.5 +55 17x8 +55 |
| Black Diamond | 2021-2023 | 17x7.5 +55 17x8 +55 |
| Outer Banks | 2021-2026 | 17x7.5 +55 17x8 +55 18x7.5 +55 |
| Badlands | 2021-2026 | 17x7.5 +55 17x8 +55 |
| Wildtrak | 2021-2026 | 17x7.5 +55 17x8 +55 17x8.5 +30 |
| Everglades | 2022-2024 | 17x7.5 +55 17x8 +55 17x8.5 +30 |
| Heritage Edition | 2023-2026 | See factory sizes below |
| Heritage Limited | 2023-2026 | 17x7.5 +55 17x8 +55 17x8.5 +30 |
| Raptor | 2022-2026 | 17x7.5 +55 17x8 +55 |
| First Edition | 2021 | 17x7.5 +55 17x8 +55 17x8.5 +30 |
| Stroppe Edition | 2025-2026 | 17x7.5 +55 17x8 +55 17x8.5 +30 |
Wheel sizes Ford fitted to the 2021-2026 Ford Bronco from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +55 |
| 17x7.5 +55 |
| 17x8 +55 |
| 17x8.5 +30 |
| 18x7.5 +55 |
Widths and offsets with Verified Fitment on the 2021-2026 Ford Bronco: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 7" | +38 to +60 |
| 16-20" | 7.5" | +44 to +54 |
Wider still: 16x8.5 +36 to +47; 17x8.5 +36 to +47; 18x8.5 +36 to +47; 19x8.5 +36 to +47; 20x8.5 +36 to +47 fit with modifications (leveling kit or small lift for larger tires, trim front fender liner and air dam, check upper control arm / sway bar clearance).
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +44 to +55 |
Wider still: 17x8.5 +36 to +47; 18x8.5 +36 to +47; 19x8.5 +36 to +47; 20x8.5 +36 to +47 fit with modifications (leveling kit or small lift for larger tires, trim front fender liner and air dam, check upper control arm / sway bar clearance).
The 2021-2026 Ford Bronco (U725) uses a 6X139.7 bolt pattern and a 93.1 mm center bore.
Factory sizes: 16x7 +55; 17x7.5 +55; 17x8 +55; 17x8.5 +30; 18x7.5 +55.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.