Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford E-150 built from 1992 to 2014 (XL, XLT, Chateau).
Every 1992-2014 Ford E-150 uses a 5X139.7 bolt pattern with a 87 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford E-150 (4th Gen) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| XL | 1992-2014 |
| XLT | 1992-2014 |
| Chateau | 1992-2004 |
Wheel sizes Ford fitted to the 1992-2014 Ford E-150 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +11.2 |
| 15x6 +14 |
| 15x7 +11.2 |
| 16x7 +11.2 |
Widths and offsets with Verified Fitment on the 1992-2014 Ford E-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6" | -19 to +24 |
| 15-18" | 6.5" | -12 to +23 |
| 15-18" | 7" | -6 to +17 |
| 15-18" | 7.5" | +0 to +10 |
Wider still: 15x8.5 -8 to +4; 16x8.5 -8 to +4; 17x8.5 -8 to +4; 18x8.5 -8 to +4 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).
The 1992-2014 Ford E-150 (4th Gen) uses a 5X139.7 bolt pattern and a 87 mm center bore.
Factory sizes: 15x6 +11.2; 15x6 +14; 15x7 +11.2; 16x7 +11.2.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.