Ford E-250 3rd Gen 1980-1991 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford E-250 built from 1980 to 1991 (XL, XLT).

Fitment specs

Bolt pattern8X165.1
Center bore123.9 mm
Model years1980-1991
Generation3rd Gen

Every 1980-1991 Ford E-250 uses a 8X165.1 bolt pattern with a 123.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 123.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford E-250 (3rd Gen) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYears
XL1980-1991
XLT1980-1991

Factory wheel sizes

Wheel sizes Ford fitted to the 1980-1991 Ford E-250 from the factory. Offsets are ET in millimeters.

Factory size
16x7 +0
16x7 +6.35
16x7 +0

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1980-1991 Ford E-250: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-17"7"-17 to +6
16-17"7.5"-11 to -1

Wider still: 16x8.5 -19 to -8; 17x8.5 -19 to -8 fit with modifications (trim the fender liners, camber / alignment adjustment, wheel alignment after install).

FAQ

What is the bolt pattern of the 1980-1991 Ford E-250?

The 1980-1991 Ford E-250 (3rd Gen) uses a 8X165.1 bolt pattern and a 123.9 mm center bore.

What size wheels came on the 1980-1991 Ford E-250 from the factory?

Factory sizes: 16x7 +0; 16x7 +6.35; 16x7 +0.

What aftermarket wheel sizes fit the 1980-1991 Ford E-250 without modifications?

Bolt-on sizes run from 16" to 17" in diameter; see the size table for the offset range at each width.