Ford F-250 8th Gen 1987-1991 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-250 built from 1987 to 1991 (Custom, XL, XLT, XLT Lariat).

Fitment specs

Bolt pattern8X165.1
Center bore124.9 mm
Lug thread9/16"-18UNF
Model years1987-1991
Generation8th Gen

Every 1987-1991 Ford F-250 uses a 8X165.1 bolt pattern with a 124.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 124.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 9/16"-18UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford F-250 (8th Gen) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYears
Custom1987-1991
XL1987-1991
XLT1987-1991
XLT Lariat1987-1991

Factory wheel sizes

Wheel sizes Ford fitted to the 1987-1991 Ford F-250 from the factory. Offsets are ET in millimeters.

Factory size
16x6 +12.7

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1987-1991 Ford F-250: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-18"6"-4 to +18
16-18"6.5"+2 to +12

Wider still: 16x7.5 -6 to +5; 17x7.5 -6 to +5; 18x7.5 -6 to +5 fit with modifications (leveling kit or lift, trim the fender liners and mud flaps, wheel alignment after install).

FAQ

What is the bolt pattern of the 1987-1991 Ford F-250?

The 1987-1991 Ford F-250 (8th Gen) uses a 8X165.1 bolt pattern and a 124.9 mm center bore.

What size wheels came on the 1987-1991 Ford F-250 from the factory?

Factory sizes: 16x6 +12.7.

What lug thread size does the 1987-1991 Ford F-250 use?

Its wheel fasteners use a 9/16"-18UNF thread.

What aftermarket wheel sizes fit the 1987-1991 Ford F-250 without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.