Ford F-250 Super Duty 1st Gen 2005-2007 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-250 Super Duty built from 2005 to 2007 (XL, XLT, Lariat, King Ranch, Harley-Davidson).

Fitment specs

Bolt pattern8X170
Center bore124.9 mm
Model years2005-2007
Generation1st Gen

Every 2005-2007 Ford F-250 Super Duty uses a 8X170 bolt pattern with a 124.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 124.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford F-250 Super Duty (1st Gen) and the model years each was sold. All of them share the 8X170 bolt pattern.

SubmodelYears
XL2005-2007
XLT2005-2007
Lariat2005-2007
King Ranch2005-2007
Harley-Davidson2005-2007

Factory wheel sizes

Wheel sizes Ford fitted to the 2005-2007 Ford F-250 Super Duty from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +40
18x8 +40
20x8 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2007 Ford F-250 Super Duty: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-22"7.5"+23 to +45
17-22"8"+29 to +39

Wider still: 17x9 +21 to +32; 18x9 +21 to +32; 19x9 +21 to +32; 20x9 +21 to +32; 21x9 +21 to +32; 22x9 +21 to +32 fit with modifications (leveling kit (2-2.5 in) for larger tires, trim front bumper valance and mud flaps, remove or trim front fender liner at full lock).

FAQ

What is the bolt pattern of the 2005-2007 Ford F-250 Super Duty?

The 2005-2007 Ford F-250 Super Duty (1st Gen) uses a 8X170 bolt pattern and a 124.9 mm center bore.

What size wheels came on the 2005-2007 Ford F-250 Super Duty from the factory?

Factory sizes: 17x7.5 +40; 18x8 +40; 20x8 +40.

What aftermarket wheel sizes fit the 2005-2007 Ford F-250 Super Duty without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.