Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Ford GT built from 2017 to 2022 (Base, Carbon Series, Heritage Edition).
Every 2017-2022 Ford Ford GT uses a 5X114.3 bolt pattern with a 70.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Ford GT (2nd Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2017-2022 |
| Carbon Series | 2019-2022 |
| Heritage Edition | 2019-2022 |
Wheel sizes Ford fitted to the 2017-2022 Ford Ford GT from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 20x8.5 +51 front / 20x11.5 +50 rear |
Widths and offsets with Verified Fitment on the 2017-2022 Ford Ford GT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 8.5" | +34 to +56 | — |
| 20-21" | 9" | +40 to +50 | — |
| 20-21" | 11.5" | — | +33 to +55 |
| 20-21" | 12" | — | +39 to +49 |
Wider still: 20x13 front — / rear +31 to +42; 21x13 front — / rear +31 to +42 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2017-2022 Ford Ford GT (2nd Gen) uses a 5X114.3 bolt pattern and a 70.5 mm center bore.
Factory sizes: 20x8.5 +51 front / 20x11.5 +50 rear.
Bolt-on sizes run from 20" to 21" in diameter; see the size table for the offset range at each width.