Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Mustang built from 1980 to 1993 (Base, Ghia, Cobra, L, GL, GLX, GT, Turbo GT, LX, GT350 20th Anniversary).
Every 1980-1993 Ford Mustang uses a 4X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Mustang (Fox) and the model years each was sold. All of them share the 4X108 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 1980-1981 | See factory sizes below |
| Ghia | 1980-1981 | See factory sizes below |
| Cobra | 1980-1981 | See factory sizes below |
| L | 1982-1983 | See factory sizes below |
| GL | 1982-1983 | See factory sizes below |
| GLX | 1982-1983 | See factory sizes below |
| GT | 1982-1993 | 16x7 +22.4 |
| Turbo GT | 1983-1984 | See factory sizes below |
| LX | 1984-1993 | See factory sizes below |
| GT350 20th Anniversary | 1984 | See factory sizes below |
Wheel sizes Ford fitted to the 1980-1993 Ford Mustang from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5 +28.4 |
| 14x5.5 +28.4 |
| 15x6 +25 |
| 15x6.5 +25 |
| 15x7 +22.4 |
| 16x7 +20 |
| 16x7 +22.4 |
| 16x7.5 +20 |
| 16x8 +20 |
| 17x7 +20 |
| 17x7.5 +20 |
| 17x8 +20 |
Widths and offsets with Verified Fitment on the 1980-1993 Ford Mustang: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-16" | 5" | -5 to +38 |
| 14-16" | 5.5" | +2 to +37 |
| 14-16" | 6" | +8 to +30 |
| 14-16" | 6.5" | +14 to +24 |
Wider still: 14x7.5 +6 to +17; 15x7.5 +6 to +17; 16x7.5 +6 to +17 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).
| Diameter | Width | Offset range |
|---|---|---|
| 16" | 7" | +21 to +22 |
Wider still: 16x7.5 +6 to +17 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).
The 1980-1993 Ford Mustang (Fox) uses a 4X108 bolt pattern and a 63.4 mm center bore.
Factory sizes: 14x5 +28.4; 14x5.5 +28.4; 15x6 +25; 15x6.5 +25; 15x7 +22.4; 16x7 +20; 16x7 +22.4; 16x7.5 +20; 16x8 +20; 17x7 +20; 17x7.5 +20; 17x8 +20.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.