Ford Mustang (SN95) 1994-1998 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Mustang built from 1994 to 1998 (Base, GT, GTS).

Fitment specs

Bolt pattern5X114.3
Center bore70.5 mm
Lug thread1/2"-20UNF
Model years1994-1998
GenerationSN95

Every 1994-1998 Ford Mustang uses a 5X114.3 bolt pattern with a 70.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Mustang (SN95) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1994-1998See factory sizes below
GT1994-199816x7.5 +30
GTS1995See factory sizes below

Factory wheel sizes

Wheel sizes Ford fitted to the 1994-1998 Ford Mustang from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +24
15x7 +24
16x7.5 +30
17x8 +30
18x8 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1994-1998 Ford Mustang: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, GTS

DiameterWidthOffset range
15-17"6.5"+0 to +34
15-17"7"+6 to +40
15-17"7.5"+13 to +35
15-17"8"+19 to +29

Wider still: 15x9 +11 to +22; 16x9 +11 to +22; 17x9 +11 to +22 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).

GT

DiameterWidthOffset range
16-17"7.5"+13 to +35
16-17"8"+19 to +29

Wider still: 16x9 +11 to +22; 17x9 +11 to +22 fit with modifications (roll rear fender lips, front camber plates or bolts for -1° or more, check strut and spring perch clearance (thin spacer if needed)).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1994-1998 Ford Mustang. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, GTS

GT

FAQ

What is the bolt pattern of the 1994-1998 Ford Mustang?

The 1994-1998 Ford Mustang (SN95) uses a 5X114.3 bolt pattern and a 70.5 mm center bore.

What size wheels came on the 1994-1998 Ford Mustang from the factory?

Factory sizes: 15x6.5 +24; 15x7 +24; 16x7.5 +30; 17x8 +30; 18x8 +30.

What lug thread size does the 1994-1998 Ford Mustang use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 1994-1998 Ford Mustang without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.