Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Probe built from 1989 to 1992 (GL, LX, GT).
Every 1989-1992 Ford Probe uses a 5X114.3 bolt pattern with a 59.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 59.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Probe (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GL | 1989-1992 | 14x5.5 +42 14x6 +42 |
| LX | 1989-1992 | 14x5.5 +42 14x6 +42 |
| GT | 1989-1992 | 15x6 +42 |
Wheel sizes Ford fitted to the 1989-1992 Ford Probe from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +42 |
| 14x6 +42 |
| 15x6 +42 |
Widths and offsets with Verified Fitment on the 1989-1992 Ford Probe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 5.5" | +25 to +47 |
| 14-17" | 6" | +31 to +41 |
Wider still: 14x7 +23 to +34; 15x7 +23 to +34; 16x7 +23 to +34; 17x7 +23 to +34 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +31 to +42 |
Wider still: 15x7 +23 to +34; 16x7 +23 to +34; 17x7 +23 to +34 fit with modifications (roll front and rear fender lips, front camber bolts for added negative camber, trim front fender liner if it rubs at full lock).
The 1989-1992 Ford Probe (1st Gen) uses a 5X114.3 bolt pattern and a 59.6 mm center bore.
Factory sizes: 14x5.5 +42; 14x6 +42; 15x6 +42.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.