Ford Windstar 2nd Gen 1999-2003 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Windstar built from 1999 to 2003 (Base, GL, LX, SE, SEL, Limited).

Fitment specs

Bolt pattern5X108
Center bore63.4 mm
Lug threadM12x1.5
Model years1999-2003
Generation2nd Gen

Every 1999-2003 Ford Windstar uses a 5X108 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Windstar (2nd Gen) and the model years each was sold. All of them share the 5X108 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1999-2003See factory sizes below
GL1999-200315x6 +42
15x6.5 +42
LX1999-200315x6 +42
15x6.5 +42
SE1999-200315x6 +42
SEL1999-2003See factory sizes below
Limited1999-2003See factory sizes below

Factory wheel sizes

Wheel sizes Ford fitted to the 1999-2003 Ford Windstar from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +42
15x6.5 +42
16x6.5 +42
16x7 +42

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999-2003 Ford Windstar: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"+18 to +52
15-17"6.5"+25 to +47
15-17"7"+31 to +41

Wider still: 15x8 +23 to +34; 16x8 +23 to +34; 17x8 +23 to +34 fit with modifications (hub-centric rings for aftermarket bores, roll fender lips, check caliper and suspension clearance on wider wheels).

FAQ

What is the bolt pattern of the 1999-2003 Ford Windstar?

The 1999-2003 Ford Windstar (2nd Gen) uses a 5X108 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 1999-2003 Ford Windstar from the factory?

Factory sizes: 15x6 +42; 15x6.5 +42; 16x6.5 +42; 16x7 +42.

What lug thread size does the 1999-2003 Ford Windstar use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1999-2003 Ford Windstar without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.