Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC S-15 Jimmy built from 1983 to 1991 (Base, Sierra Classic, Gypsy).
Every 1983-1991 GMC S-15 Jimmy uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC S-15 Jimmy (1st Gen) and the model years each was sold. All of them share the 5X120.65 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1983-1991 |
| Sierra Classic | 1983-1991 |
| Gypsy | 1983-1991 |
Wheel sizes GMC fitted to the 1983-1991 GMC S-15 Jimmy from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +28 |
| 14x6 +25 |
| 15x6 +63 |
| 15x7 +51 |
Widths and offsets with Verified Fitment on the 1983-1991 GMC S-15 Jimmy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 5.5" | +11 to +38 |
| 14-17" | 6" | +17 to +44 |
| 14-17" | 6.5" | +24 to +51 |
| 14-17" | 7" | +30 to +56 |
Wider still: 14x7.5 +16 to +55; 14x8 +22 to +49; 15x7.5 +16 to +55; 15x8 +22 to +49; 16x7.5 +16 to +55; 16x8 +22 to +49… fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 1983-1991 GMC S-15 Jimmy (1st Gen) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.
Factory sizes: 14x5.5 +28; 14x6 +25; 15x6 +63; 15x7 +51.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.