Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC S-15 Jimmy built from 1992 to 1994 (SL, SLE).
Every 1992-1994 GMC S-15 Jimmy uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC S-15 Jimmy (1st Gen) and the model years each was sold. All of them share the 5X120.65 bolt pattern.
| Submodel | Years |
|---|---|
| SL | 1992-1994 |
| SLE | 1992-1994 |
Wheel sizes GMC fitted to the 1992-1994 GMC S-15 Jimmy from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +63 |
| 15x7 +51 |
Widths and offsets with Verified Fitment on the 1992-1994 GMC S-15 Jimmy: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +46 to +68 |
| 15-17" | 6.5" | +52 to +62 |
Wider still: 15x7.5 +44 to +55; 16x7.5 +44 to +55; 17x7.5 +44 to +55 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 1992-1994 GMC S-15 Jimmy (1st Gen) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.
Factory sizes: 15x6 +63; 15x7 +51.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.