GMC Sierra 1500 (T1XX) 2019-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Sierra 1500 built from 2019 to 2026 (Pro, SLE, Elevation, SLT, AT4, AT4X, Denali, Denali Ultimate).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2019-2026
GenerationT1XX

Every 2019-2026 GMC Sierra 1500 uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Sierra 1500 (T1XX) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
Pro2019-2026
SLE2019-2026
Elevation2019-2026
SLT2019-2026
AT42019-2026
AT4X2022-2026
Denali2019-2026
Denali Ultimate2022-2026

Factory wheel sizes

Wheel sizes GMC fitted to the 2019-2026 GMC Sierra 1500 from the factory. Offsets are ET in millimeters.

Factory size
17x8 +24
18x8.5 +26
20x9 +28
22x9 +28

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2019-2026 GMC Sierra 1500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-19"8"+2 to +34
17-19"8.5"+9 to +31
17-19"9"+15 to +25

Wider still: 17x10 +7 to +18; 18x10 +7 to +18; 19x10 +7 to +18 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

FAQ

What is the bolt pattern of the 2019-2026 GMC Sierra 1500?

The 2019-2026 GMC Sierra 1500 (T1XX) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2019-2026 GMC Sierra 1500 from the factory?

Factory sizes: 17x8 +24; 18x8.5 +26; 20x9 +28; 22x9 +28.

What lug thread size does the 2019-2026 GMC Sierra 1500 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2019-2026 GMC Sierra 1500 without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.