Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Sierra 1500 built from 1999 to 2007 (Work Truck, SL, SLE, SLT, Denali).
Every 1999-2007 GMC Sierra 1500 uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC Sierra 1500 (GMT800) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Work Truck | 1999-2007 |
| SL | 1999-2007 |
| SLE | 1999-2007 |
| SLT | 1999-2007 |
| Denali | 2002-2007 |
Wheel sizes GMC fitted to the 1999-2007 GMC Sierra 1500 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +25 |
| 16x7 +31 |
| 17x7 +31 |
| 17x7.5 +31 |
| 18x7.5 +30 |
| 18x8 +25 |
| 18x8 +31 |
| 20x8.5 +31 |
Widths and offsets with Verified Fitment on the 1999-2007 GMC Sierra 1500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-22" | 7" | +14 to +37 |
| 16-22" | 7.5" | +20 to +30 |
Wider still: 16x8.5 +12 to +23; 17x8.5 +12 to +23; 18x8.5 +12 to +23; 19x8.5 +12 to +23; 20x8.5 +12 to +23; 21x8.5 +12 to +23… fit with modifications (front leveling kit for larger tires, trim front bumper valance and inner fender liner, upper control arms for 2in+ lift).
The 1999-2007 GMC Sierra 1500 (GMT800) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.
Factory sizes: 16x6.5 +25; 16x7 +31; 17x7 +31; 17x7.5 +31; 18x7.5 +30; 18x8 +25; 18x8 +31; 20x8.5 +31.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.