GMC Sonoma 1st Gen 1991-1993 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Sonoma built from 1991 to 1993 (Base, SLS, SLE).

Fitment specs

Bolt pattern5X120.65
Center bore70.3 mm
Lug threadM12x1.5
Model years1991-1993
Generation1st Gen

Every 1991-1993 GMC Sonoma uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Sonoma (1st Gen) and the model years each was sold. All of them share the 5X120.65 bolt pattern.

SubmodelYears
Base1991-1993
SLS1991-1993
SLE1991-1993

Factory wheel sizes

Wheel sizes GMC fitted to the 1991-1993 GMC Sonoma from the factory. Offsets are ET in millimeters.

Factory size
14x5.5 +28
14x6 +25
15x6 +63
15x7 +51
17x7 +51

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1991-1993 GMC Sonoma: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"5.5"+11 to +38
14-17"6"+17 to +44
14-17"6.5"+24 to +51
14-17"7"+30 to +56

Wider still: 14x7.5 +16 to +55; 14x8 +22 to +49; 15x7.5 +16 to +55; 15x8 +22 to +49; 16x7.5 +16 to +55; 16x8 +22 to +49… fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1991-1993 GMC Sonoma?

The 1991-1993 GMC Sonoma (1st Gen) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1991-1993 GMC Sonoma from the factory?

Factory sizes: 14x5.5 +28; 14x6 +25; 15x6 +63; 15x7 +51; 17x7 +51.

What lug thread size does the 1991-1993 GMC Sonoma use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1991-1993 GMC Sonoma without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.