GMC Sonoma (GMT325) 1994-2004 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the GMC Sonoma built from 1994 to 2004 (SL, SLS, SLE, Highrider).

Fitment specs

Bolt pattern5X120.65
Center bore70.3 mm
Lug threadM12x1.5
Model years1994-2004
GenerationGMT325

Every 1994-2004 GMC Sonoma uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Sonoma (GMT325) and the model years each was sold. All of them share the 5X120.65 bolt pattern.

SubmodelYearsFactory wheel sizes
SL1994-200415x7 +51
SLS1994-200415x6 +25
15x6 +63
15x7 +51
SLE1994-2004See factory sizes below
Highrider1998-2003See factory sizes below

Factory wheel sizes

Wheel sizes GMC fitted to the 1994-2004 GMC Sonoma from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +25
15x6 +63
15x7 +51
16x7.5 +12

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1994-2004 GMC Sonoma: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SL

DiameterWidthOffset range
15-17"7"+21 to +56

Wider still: 15x7.5 +6 to +55; 15x8 +13 to +49; 16x7.5 +6 to +55; 16x8 +13 to +49; 17x7.5 +6 to +55; 17x8 +13 to +49 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

SLS, SLE, Highrider

DiameterWidthOffset range
15-17"6"+8 to +35
15-17"6.5"+14 to +41
15-17"7"+21 to +48

Wider still: 15x7.5 +6 to +55; 15x8 +13 to +49; 16x7.5 +6 to +55; 16x8 +13 to +49; 17x7.5 +6 to +55; 17x8 +13 to +49 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1994-2004 GMC Sonoma?

The 1994-2004 GMC Sonoma (GMT325) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1994-2004 GMC Sonoma from the factory?

Factory sizes: 15x6 +25; 15x6 +63; 15x7 +51; 16x7.5 +12.

What lug thread size does the 1994-2004 GMC Sonoma use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1994-2004 GMC Sonoma without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.