Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Ridgeline built from 2019 to 2025 (RT, RTS, Sport, RTL, RTL-E, TrailSport, Black Edition).
Every 2019-2025 Honda Ridgeline uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Ridgeline and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| RT | 2019 | 18x8 +55 |
| RTS | 2019 | See factory sizes below |
| Sport | 2019-2025 | 18x8 +55 |
| RTL | 2019-2025 | 18x8 +55 |
| RTL-E | 2019-2023 | 18x8 +55 |
| TrailSport | 2024-2025 | 18x8 +45 |
| Black Edition | 2019-2025 | 18x8 +55 |
Wheel sizes Honda fitted to the 2019-2025 Honda Ridgeline from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +45 |
| 18x8 +55 |
Widths and offsets with Verified Fitment on the 2019-2025 Honda Ridgeline: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +38 to +60 |
| 18-20" | 8.5" | +44 to +54 |
Wider still: 18x9.5 +36 to +47; 19x9.5 +36 to +47; 20x9.5 +36 to +47 fit with modifications (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +38 to +55 |
| 18-20" | 8.5" | +44 to +54 |
Wider still: 18x9.5 +36 to +47; 19x9.5 +36 to +47; 20x9.5 +36 to +47 fit with modifications (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2025 Honda Ridgeline. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels)












Modifications Required (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels)












The 2019-2025 Honda Ridgeline uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 18x8 +45; 18x8 +55.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.