Honda Ridgeline (YK1) 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Ridgeline built from 2026 to 2026 (Sport, RTL, TrailSport, Black Edition).

Fitment specs

Bolt pattern5X120
Center bore64.1 mm
Lug threadM14x1.5
Model years2026
GenerationYK1

Every 2026 Honda Ridgeline uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Ridgeline (YK1) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Sport202618x8 +45
RTL202618x8 +45
TrailSport202618x8 +45
Black Edition202618x8 +45

Factory wheel sizes

Wheel sizes Honda fitted to the 2026 Honda Ridgeline from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Honda Ridgeline: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"8"+28 to +50
18-20"8.5"+34 to +44

Wider still: 18x9.5 +26 to +37; 19x9.5 +26 to +37; 20x9.5 +26 to +37 fit with modifications (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Honda Ridgeline. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (leveling kit (front) for larger tires, trim front inner fender liner / bumper valance, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2026 Honda Ridgeline?

The 2026 Honda Ridgeline (YK1) uses a 5X120 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2026 Honda Ridgeline from the factory?

Factory sizes: 18x8 +45.

What lug thread size does the 2026 Honda Ridgeline use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2026 Honda Ridgeline without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.