Infiniti G20 (P10) 1991-1996 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti G20 built from 1991 to 1996 (Base, t).

Fitment specs

Bolt pattern4X114.3
Center bore66.1 mm
Model years1991-1996
GenerationP10

Every 1991-1996 Infiniti G20 uses a 4X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti G20 (P10) and the model years each was sold. All of them share the 4X114.3 bolt pattern.

SubmodelYears
Base1991-1996
t1994-1996

Factory wheel sizes

Wheel sizes Infiniti fitted to the 1991-1996 Infiniti G20 from the factory. Offsets are ET in millimeters.

Factory size
14x6 +45
15x6 +45
16x6 +45
17x6.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1991-1996 Infiniti G20: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"6"+28 to +51
14-17"6.5"+34 to +44

Wider still: 14x7.5 +26 to +37; 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 1991-1996 Infiniti G20?

The 1991-1996 Infiniti G20 (P10) uses a 4X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 1991-1996 Infiniti G20 from the factory?

Factory sizes: 14x6 +45; 15x6 +45; 16x6 +45; 17x6.5 +45.

What aftermarket wheel sizes fit the 1991-1996 Infiniti G20 without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.