Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti G20 built from 1999 to 2002 (Luxury, Touring).
Every 1999-2002 Infiniti G20 uses a 4X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Infiniti G20 (P11) and the model years each was sold. All of them share the 4X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Luxury | 1999-2002 |
| Touring | 1999-2002 |
Wheel sizes Infiniti fitted to the 1999-2002 Infiniti G20 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +45 |
| 16x6.5 +48 |
| 17x7 +42 |
Widths and offsets with Verified Fitment on the 1999-2002 Infiniti G20: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +28 to +51 |
| 15-17" | 6.5" | +34 to +44 |
Wider still: 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).
The 1999-2002 Infiniti G20 (P11) uses a 4X114.3 bolt pattern and a 66.1 mm center bore.
Factory sizes: 15x6 +45; 16x6.5 +48; 17x7 +42.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.