Infiniti QX80 (Z63) 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti QX80 built from 2025 to 2026 (Autograph, Luxe, Pure, Sensory, Sport).

Fitment specs

Bolt pattern6X139.7
Center bore77.8 mm
Lug threadM14x1.5
Model years2025-2026
GenerationZ63

Every 2025-2026 Infiniti QX80 uses a 6X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti QX80 (Z63) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
Autograph2025-2026
Luxe2025-2026
Pure2025-2026
Sensory2025
Sport2026

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2025-2026 Infiniti QX80 from the factory. Offsets are ET in millimeters.

Factory size
20x8.5 +45
22x8.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Infiniti QX80: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
20-24"8.5"+28 to +50
20-24"9"+34 to +44

Wider still: 20x10 +26 to +37; 21x10 +26 to +37; 22x10 +26 to +37; 23x10 +26 to +37; 24x10 +26 to +37 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Infiniti QX80. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)

FAQ

What is the bolt pattern of the 2025-2026 Infiniti QX80?

The 2025-2026 Infiniti QX80 (Z63) uses a 6X139.7 bolt pattern and a 77.8 mm center bore.

What size wheels came on the 2025-2026 Infiniti QX80 from the factory?

Factory sizes: 20x8.5 +45; 22x8.5 +45.

What lug thread size does the 2025-2026 Infiniti QX80 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Infiniti QX80 without modifications?

Bolt-on sizes run from 20" to 24" in diameter; see the size table for the offset range at each width.