Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti QX80 built from 2014 to 2024 (Base, Limited, Luxe, Premium Select, Sensory, Proactive).
Every 2014-2024 Infiniti QX80 uses a 6X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Infiniti QX80 (Z62) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2014-2019 | See factory sizes below |
| Limited | 2015-2019 | 22x8 +30 |
| Luxe | 2020-2024 | 20x8 +30 |
| Premium Select | 2021-2024 | 22x8 +30 |
| Sensory | 2021-2024 | 22x8 +30 |
| Proactive | 2021-2024 | See factory sizes below |
Wheel sizes Infiniti fitted to the 2014-2024 Infiniti QX80 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x8 +30 |
| 22x8 +30 |
| 22x9 +25 |
Widths and offsets with Verified Fitment on the 2014-2024 Infiniti QX80: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 8" | +13 to +35 |
| 20-22" | 8.5" | +19 to +29 |
Wider still: 20x9.5 +11 to +22; 21x9.5 +11 to +22; 22x9.5 +11 to +22 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
| Diameter | Width | Offset range |
|---|---|---|
| 22" | 8" | +13 to +35 |
| 22" | 8.5" | +19 to +29 |
Wider still: 22x9.5 +11 to +22 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 8" | +13 to +35 |
| 20-22" | 8.5" | +19 to +29 |
Wider still: 20x9.5 +11 to +22; 21x9.5 +11 to +22; 22x9.5 +11 to +22 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2024 Infiniti QX80. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)







Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)







Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)







The 2014-2024 Infiniti QX80 (Z62) uses a 6X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 20x8 +30; 22x8 +30; 22x9 +25.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.