Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Cherokee built from 1984 to 2001 (Base, SE, Pioneer, Chief, Sport, Laredo, Country, Classic, Briarwood, Limited).
Every 1984-2001 Jeep Cherokee uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Jeep Cherokee (XJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 1984-1992 | See factory sizes below |
| SE | 1993-2001 | 15x7 +25 |
| Pioneer | 1984-1990 | 15x7 +25 |
| Chief | 1984-1990 | 15x7 +25 |
| Sport | 1988-2001 | 15x7 +25 |
| Laredo | 1985-1992 | 15x7 +25 |
| Country | 1993-1997 | 15x7 +25 |
| Classic | 1996-2001 | 15x7 +25 16x7 +25 |
| Briarwood | 1991-1992 | 15x7 +25 |
| Limited | 1987-2001 | 15x7 +25 16x7 +25 |
Wheel sizes Jeep fitted to the 1984-2001 Jeep Cherokee from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +25 |
| 16x7 +25 |
| 17x7.5 +25 |
Widths and offsets with Verified Fitment on the 1984-2001 Jeep Cherokee: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-19" | 7" | +8 to +31 |
| 15-19" | 7.5" | +14 to +24 |
Wider still: 15x8.5 +6 to +17; 16x8.5 +6 to +17; 17x8.5 +6 to +17; 18x8.5 +6 to +17; 19x8.5 +6 to +17 fit with modifications (2-3 in lift kit for 30-31 in tires, trim front bumper end caps / fender flares, hub-centric rings or lug-centric wheels with correct seat).
The 1984-2001 Jeep Cherokee (XJ) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.
Factory sizes: 15x7 +25; 16x7 +25; 17x7.5 +25.
Its wheel fasteners use a 1/2"-20UNF thread.
Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.