Jeep Cherokee (KM) 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Cherokee built from 2026 to 2026 (Base, Laredo, Limited, Overland).

Fitment specs

Bolt pattern5X127
Center bore71.5 mm
Lug threadM14x1.5
Model years2026
GenerationKM

Every 2026 Jeep Cherokee uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Jeep Cherokee (KM) and the model years each was sold. All of them share the 5X127 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2026See factory sizes below
Laredo202618x7
Limited202618x7
Overland202620x8
20x8.5

Factory wheel sizes

Wheel sizes Jeep fitted to the 2026 Jeep Cherokee from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Jeep Cherokee: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"7"+28 to +51
18-20"7.5"+34 to +44

Wider still: 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (trim or heat-form the plastic fender liners, camber / alignment adjustment, wheel alignment after install).

FAQ

What is the bolt pattern of the 2026 Jeep Cherokee?

The 2026 Jeep Cherokee (KM) uses a 5X127 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2026 Jeep Cherokee from the factory?

Factory sizes: 18x7 +45.

What lug thread size does the 2026 Jeep Cherokee use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2026 Jeep Cherokee without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.