Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Jeep Grand Wagoneer built from 1984 to 1991.
Every 1984-1991 Jeep Grand Wagoneer uses a 6X139.7 bolt pattern with a 89.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 89.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Jeep Grand Wagoneer (SJ) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1984-1991 |
Wheel sizes Jeep fitted to the 1984-1991 Jeep Grand Wagoneer from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +10 |
| 15x7 +0 |
| 15x8 -10 |
Widths and offsets with Verified Fitment on the 1984-1991 Jeep Grand Wagoneer: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | -7 to +15 |
| 15-17" | 6.5" | -1 to +9 |
Wider still: 15x7.5 -9 to +2; 16x7.5 -9 to +2; 17x7.5 -9 to +2 fit with modifications (2-3 in lift kit for 30-31 in tires, trim front bumper end caps / fender flares, hub-centric rings or lug-centric wheels with correct seat).
The 1984-1991 Jeep Grand Wagoneer (SJ) uses a 6X139.7 bolt pattern and a 89.1 mm center bore.
Factory sizes: 15x6 +10; 15x7 +0; 15x8 -10.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.