Jeep Grand Wagoneer (ZJ) 1993 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Jeep Grand Wagoneer built from 1993 to 1993.

Fitment specs

Bolt pattern5X114.3
Center bore71.5 mm
Model years1993
GenerationZJ

Every 1993 Jeep Grand Wagoneer uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Jeep Grand Wagoneer (ZJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base1993

Factory wheel sizes

Wheel sizes Jeep fitted to the 1993 Jeep Grand Wagoneer from the factory. Offsets are ET in millimeters.

Factory size
15x7 +25
15x7 +31
16x7 +25

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1993 Jeep Grand Wagoneer: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"7"+8 to +31
15-17"7.5"+14 to +24

Wider still: 15x8.5 +6 to +17; 16x8.5 +6 to +17; 17x8.5 +6 to +17 fit with modifications (2-3 in lift kit for 30-31 in tires, trim front bumper end caps / fender flares, hub-centric rings or lug-centric wheels with correct seat).

FAQ

What is the bolt pattern of the 1993 Jeep Grand Wagoneer?

The 1993 Jeep Grand Wagoneer (ZJ) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 1993 Jeep Grand Wagoneer from the factory?

Factory sizes: 15x7 +25; 15x7 +31; 16x7 +25.

What aftermarket wheel sizes fit the 1993 Jeep Grand Wagoneer without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.