Kia Optima (TF) 2011-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Kia Optima built from 2011 to 2015 (LX, EX, SX, SXL, Hybrid).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2011-2015
GenerationTF

Every 2011-2015 Kia Optima uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Kia Optima (TF) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
LX2011-201516x6.5 +44
EX2011-2015See factory sizes below
SX2011-201518x7.5 +52.5
SXL2012-2015See factory sizes below
Hybrid2011-201516x6.5 +44

Factory wheel sizes

Wheel sizes Kia fitted to the 2011-2015 Kia Optima from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +41
17x6.5 +44
17x7 +45
18x7.5 +46

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2015 Kia Optima: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LX, Hybrid

DiameterWidthOffset range
16-18"6.5"+18 to +54
16-18"7"+24 to +56
16-18"7.5"+31 to +49
16-18"8"+37 to +43

EX, SXL

DiameterWidthOffset range
16-18"6.5"+18 to +51
16-18"7"+24 to +56
16-18"7.5"+31 to +49
16-18"8"+37 to +43

SX

DiameterWidthOffset range
18"7.5"+31 to +52
18"8"+37 to +46

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2015 Kia Optima. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

LX, Hybrid

Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)

EX, SXL

Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)

SX

Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2011-2015 Kia Optima?

The 2011-2015 Kia Optima (TF) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2011-2015 Kia Optima from the factory?

Factory sizes: 16x6.5 +41; 17x6.5 +44; 17x7 +45; 18x7.5 +46.

What lug thread size does the 2011-2015 Kia Optima use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2011-2015 Kia Optima without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.