Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Optima built from 2001 to 2006 (LX, SE, EX).
Every 2001-2006 Kia Optima uses a 4X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Optima (MS) and the model years each was sold. All of them share the 4X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2001-2006 |
| SE | 2001-2006 |
| EX | 2001-2006 |
Wheel sizes Kia fitted to the 2001-2006 Kia Optima from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5.5 +46 |
| 15x6 +46 |
| 16x6.5 +36 |
Widths and offsets with Verified Fitment on the 2001-2006 Kia Optima: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-15" | 5.5" | +28 to +50 |
| 14-15" | 6" | +34 to +44 |
Wider still: 14x7 +26 to +37; 15x7 +26 to +37 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).
The 2001-2006 Kia Optima (MS) uses a 4X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 14x5.5 +46; 15x6 +46; 16x6.5 +36.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 15" in diameter; see the size table for the offset range at each width.