Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Rio built from 2012 to 2017 (LX, EX, SX).
Every 2012-2017 Kia Rio uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Rio (UB) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2012-2017 |
| EX | 2012-2017 |
| SX | 2012-2017 |
Wheel sizes Kia fitted to the 2012-2017 Kia Rio from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +46 |
| 15x6 +48 |
| 16x6 +43 |
| 17x6.5 +43 |
Widths and offsets with Verified Fitment on the 2012-2017 Kia Rio: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-17" | 6" | +29 to +51 |
| 14-17" | 6.5" | +35 to +45 |
Wider still: 14x7.5 +27 to +38; 15x7.5 +27 to +38; 16x7.5 +27 to +38; 17x7.5 +27 to +38 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).
The 2012-2017 Kia Rio (UB) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 15x5.5 +46; 15x6 +48; 16x6 +43; 17x6.5 +43.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.