Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Sportage built from 1995 to 2002 (Base, EX).
Every 1995-2002 Kia Sportage uses a 5X139.7 bolt pattern with a 94.7 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 94.7 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Sportage (NB-7) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1995-2002 |
| EX | 1995-2002 |
Wheel sizes Kia fitted to the 1995-2002 Kia Sportage from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +45 |
| 16x6.5 +42 |
Widths and offsets with Verified Fitment on the 1995-2002 Kia Sportage: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +28 to +51 |
| 15-17" | 6.5" | +34 to +44 |
Wider still: 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
The 1995-2002 Kia Sportage (NB-7) uses a 5X139.7 bolt pattern and a 94.7 mm center bore.
Factory sizes: 15x6 +45; 16x6.5 +42.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.