Kia Sportage (SL) 2011-2016 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Kia Sportage built from 2011 to 2016 (Base, LX, EX, SX).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2011-2016
GenerationSL

Every 2011-2016 Kia Sportage uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Kia Sportage (SL) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2011-2016See factory sizes below
LX2011-201616x6.5 +31.5
16x6.5 +36
17x6.5 +35
17x6.5 +40
17x7 +40
EX2011-201618x7 +40.5
18x7 +42.5
18x7 +45
SX2011-201618x7 +40.5
18x7 +42.5
18x7 +45

Factory wheel sizes

Wheel sizes Kia fitted to the 2011-2016 Kia Sportage from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +31.5
16x6.5 +36
17x6.5 +35
17x6.5 +40
17x7 +40
18x7 +40.5
18x7 +42.5
18x7 +45
19x7.5 +50
19x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2016 Kia Sportage: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, LX

DiameterWidthOffset range
16-19"6.5"+14 to +37
16-19"7"+21 to +31

Wider still: 16x8 +13 to +24; 17x8 +13 to +24; 18x8 +13 to +24; 19x8 +13 to +24 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

EX, SX

DiameterWidthOffset range
18-19"7"+21 to +40
18-19"7.5"+27 to +34

Wider still: 18x8 +13 to +27; 18x8.5 +19 to +21; 19x8 +13 to +27; 19x8.5 +19 to +21 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 2011-2016 Kia Sportage?

The 2011-2016 Kia Sportage (SL) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2011-2016 Kia Sportage from the factory?

Factory sizes: 16x6.5 +31.5; 16x6.5 +36; 17x6.5 +35; 17x6.5 +40; 17x7 +40; 18x7 +40.5; 18x7 +42.5; 18x7 +45; 19x7.5 +50; 19x8 +45.

What lug thread size does the 2011-2016 Kia Sportage use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2011-2016 Kia Sportage without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.