Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus LS built from 1995 to 1997.
Every 1995-1997 Lexus LS uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus LS (XF20) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LS 400 | 1995-1997 | 16x7 +45 17x7 +45 17x7.5 +45 18x8 +45 |
Wheel sizes Lexus fitted to the 1995-1997 Lexus LS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +45 |
| 17x7 +45 |
| 17x7.5 +45 |
| 18x8 +45 |
Widths and offsets with Verified Fitment on the 1995-1997 Lexus LS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-19" | 7" | +24 to +55 | +10 to +55 |
| 16-19" | 7.5" | +31 to +53 | +16 to +53 |
| 16-19" | 8" | +37 to +47 | +23 to +47 |
| 16-19" | 8.5" | — | +29 to +41 |
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1995-1997 Lexus LS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.




Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)












The 1995-1997 Lexus LS (XF20) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 16x7 +45; 17x7 +45; 17x7.5 +45; 18x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.