Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus LS built from 2018 to 2026 (LS 500, LS 500h, 500 Heritage Edition).
Every 2018-2026 Lexus LS uses a 5X120 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus LS (XF50) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LS 500 | 2018-2025 | 19x8 +25 20x8.5 +25 20x8.5 +25 front / 20x9.5 +35 rear |
| LS 500h | 2018-2025 | 19x8 +25 20x8.5 +25 20x8.5 +25 front / 20x9.5 +35 rear |
| 500 Heritage Edition | 2026 | See factory sizes below |
Wheel sizes Lexus fitted to the 2018-2026 Lexus LS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +25 |
| 20x8.5 +25 |
| 20x8.5 +25 front / 20x9.5 +35 rear |
| 21x8.5 +25 front / 21x9.5 +35 rear |
Widths and offsets with Verified Fitment on the 2018-2026 Lexus LS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 8" | +6 to +35 | +6 to +35 |
| 19-21" | 8.5" | +13 to +40 | +13 to +41 |
| 19-21" | 9" | +19 to +34 | +19 to +41 |
| 19-21" | 9.5" | +26 to +27 | +26 to +34 |
Wider still: 19x10 front — / rear +14 to +31; 19x10.5 front — / rear +21 to +24; 20x10 front — / rear +14 to +31; 20x10.5 front — / rear +21 to +24; 21x10 front — / rear +14 to +31; 21x10.5 front — / rear +21 to +24 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 8" | +1 to +35 | +1 to +35 |
| 19-21" | 8.5" | +8 to +41 | +8 to +41 |
| 19-21" | 9" | +14 to +37 | +14 to +44 |
| 19-21" | 9.5" | +21 to +30 | +21 to +37 |
Wider still: 19x10 front — / rear +9 to +34; 19x10.5 front — / rear +16 to +27; 20x10 front — / rear +9 to +34; 20x10.5 front — / rear +16 to +27; 21x10 front — / rear +9 to +34; 21x10.5 front — / rear +16 to +27 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2018-2026 Lexus LS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.







Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)













Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2018-2026 Lexus LS (XF50) uses a 5X120 bolt pattern and a 60.1 mm center bore.
Factory sizes: 19x8 +25; 20x8.5 +25; 20x8.5 +25 front / 20x9.5 +35 rear; 21x8.5 +25 front / 21x9.5 +35 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.