Mazda B-Series 5th Gen 1998-2009 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda B-Series built from 1998 to 2009 (B2300, B2500, B3000, B4000).

Fitment specs

Bolt pattern5X114.3
Center bore70.6 mm
Lug threadM12x1.5
Model years1998-2009
Generation5th Gen

Every 1998-2009 Mazda B-Series uses a 5X114.3 bolt pattern with a 70.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda B-Series (5th Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
B23001998-200915x7 +10
16x7 +10
B25001998-200115x7 +10
B30001998-200815x7 +10
16x7 +10
B40001998-200915x7 +10
16x7 +10

Factory wheel sizes

Wheel sizes Mazda fitted to the 1998-2009 Mazda B-Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x7 +10
16x7 +10

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1998-2009 Mazda B-Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"7"-7 to +16
15-18"7.5"-1 to +9

Wider still: 15x8.5 -9 to +2; 16x8.5 -9 to +2; 17x8.5 -9 to +2; 18x8.5 -9 to +2 fit with modifications (trim front valance and mud flaps, 1.5-2 in. leveling kit or body lift for larger tires, trim or roll fender lips).

FAQ

What is the bolt pattern of the 1998-2009 Mazda B-Series?

The 1998-2009 Mazda B-Series (5th Gen) uses a 5X114.3 bolt pattern and a 70.6 mm center bore.

What size wheels came on the 1998-2009 Mazda B-Series from the factory?

Factory sizes: 15x7 +10; 16x7 +10.

What lug thread size does the 1998-2009 Mazda B-Series use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1998-2009 Mazda B-Series without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.