Mazda CX-5 (KE) 2013-2016 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-5 built from 2013 to 2016 (Sport, Touring, Grand Touring).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2013-2016
GenerationKE

Every 2013-2016 Mazda CX-5 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda CX-5 (KE) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Sport2013-201617x7 +45
17x7 +50
Touring2013-201617x7 +45
17x7 +50
Grand Touring2013-201619x7 +45
19x7 +50
19x7.5 +45

Factory wheel sizes

Wheel sizes Mazda fitted to the 2013-2016 Mazda CX-5 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +50
18x7 +50
19x7 +50
19x7.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2016 Mazda CX-5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Sport, Touring

DiameterWidthOffset range
17-21"7"+28 to +55
17-21"7.5"+34 to +49
17-21"8"+41 to +43

Wider still: 17x8.5 +26 to +42; 17x9 +32 to +36; 18x8.5 +26 to +42; 18x9 +32 to +36; 19x8.5 +26 to +42; 19x9 +32 to +36… fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

Grand Touring

DiameterWidthOffset range
19-21"7"+28 to +55
19-21"7.5"+34 to +49
19-21"8"+41 to +43

Wider still: 19x8.5 +26 to +42; 19x9 +32 to +36; 20x8.5 +26 to +42; 20x9 +32 to +36; 21x8.5 +26 to +42; 21x9 +32 to +36 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2013-2016 Mazda CX-5. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Sport, Touring

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

Grand Touring

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2013-2016 Mazda CX-5?

The 2013-2016 Mazda CX-5 (KE) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2013-2016 Mazda CX-5 from the factory?

Factory sizes: 17x7 +50; 18x7 +50; 19x7 +50; 19x7.5 +45.

What lug thread size does the 2013-2016 Mazda CX-5 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2013-2016 Mazda CX-5 without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.