Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-5 built from 2017 to 2026 (Sport, Touring, Grand Touring, Grand Touring Reserve, Select, Preferred, Carbon Edition, Premium, Premium Plus, Turbo, Signature).
Every 2017-2026 Mazda CX-5 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-5 (KF) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Sport | 2017-2021 | 17x7 +45 17x7 +50 |
| Touring | 2017-2021 | 17x7 +45 17x7 +50 |
| Grand Touring | 2017-2021 | 19x7 +45 19x7 +50 19x7.5 +45 |
| Grand Touring Reserve | 2019-2021 | 19x7 +45 19x7.5 +45 |
| Select | 2022-2026 | See factory sizes below |
| Preferred | 2022-2026 | See factory sizes below |
| Carbon Edition | 2021-2026 | 19x7 +45 19x7.5 +45 |
| Premium | 2022-2026 | See factory sizes below |
| Premium Plus | 2022-2026 | See factory sizes below |
| Turbo | 2022-2026 | See factory sizes below |
| Signature | 2019-2024 | 19x7 +45 19x7.5 +45 |
Wheel sizes Mazda fitted to the 2017-2026 Mazda CX-5 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +45 |
| 17x7 +50 |
| 18x7 +45 |
| 18x7 +50 |
| 19x7 +45 |
| 19x7 +50 |
| 19x7.5 +45 |
| 20x8 +45 |
Widths and offsets with Verified Fitment on the 2017-2026 Mazda CX-5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7" | +21 to +55 |
| 17-21" | 7.5" | +28 to +49 |
| 17-21" | 8" | +34 to +43 |
Wider still: 17x9 +32 to +36; 18x9 +32 to +36; 19x9 +32 to +36; 20x9 +32 to +36; 21x9 +32 to +36 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 7" | +21 to +55 |
| 19-21" | 7.5" | +28 to +49 |
| 19-21" | 8" | +34 to +43 |
Wider still: 19x9 +32 to +36; 20x9 +32 to +36; 21x9 +32 to +36 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2026 Mazda CX-5. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.







Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)











The 2017-2026 Mazda CX-5 (KF) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 17x7 +45; 17x7 +50; 18x7 +45; 18x7 +50; 19x7 +45; 19x7 +50; 19x7.5 +45; 20x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.