Mazda Mazda6 (GJ) 2014-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda Mazda6 built from 2014 to 2021 (Sport, Touring, Grand Touring, Grand Touring Reserve, Carbon Edition, Signature).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2014-2021
GenerationGJ

Every 2014-2021 Mazda Mazda6 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda Mazda6 (GJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Sport2014-202117x7.5 +50
Touring2014-202119x7.5 +45
Grand Touring2014-202119x7.5 +45
Grand Touring Reserve2018-202119x7.5 +45
Carbon Edition202119x7.5 +45
Signature2018-202119x7.5 +45

Factory wheel sizes

Wheel sizes Mazda fitted to the 2014-2021 Mazda Mazda6 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +50
18x7.5 +45
19x7.5 +45
19x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2021 Mazda Mazda6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Sport

DiameterWidthOffset range
17-20"7.5"+25 to +57
17-20"8"+31 to +51
17-20"8.5"+38 to +44

Touring, Grand Touring, Grand Touring Reserve, Carbon Edition, Signature

DiameterWidthOffset range
19-20"7.5"+25 to +55
19-20"8"+31 to +51
19-20"8.5"+38 to +44

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2021 Mazda Mazda6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Sport

Modifications Required (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger)

Touring, Grand Touring, Grand Touring Reserve, Carbon Edition, Signature

Modifications Required (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2014-2021 Mazda Mazda6?

The 2014-2021 Mazda Mazda6 (GJ) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2014-2021 Mazda Mazda6 from the factory?

Factory sizes: 17x7.5 +50; 18x7.5 +45; 19x7.5 +45; 19x8 +45.

What lug thread size does the 2014-2021 Mazda Mazda6 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2014-2021 Mazda Mazda6 without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.