Mazda Tribute 2001-2006 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda Tribute built from 2001 to 2006 (DX, LX, ES, i, s).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2001-2006
Generation

Every 2001-2006 Mazda Tribute uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda Tribute and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
DX2001-200316x6.5 +50
LX2001-200316x7 +45
ES2001-200416x7 +45
i2004-2006See factory sizes below
s2004-2006See factory sizes below

Factory wheel sizes

Wheel sizes Mazda fitted to the 2001-2006 Mazda Tribute from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +50
16x7 +45
17x7 +45
17x7.5 +42
17x7.5 +45
18x7.5 +42
18x8 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2001-2006 Mazda Tribute: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DX

DiameterWidthOffset range
16-19"6.5"+22 to +57
16-19"7"+28 to +50
16-19"7.5"+34 to +44

Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

LX, ES, i, s

DiameterWidthOffset range
16-19"7"+28 to +50
16-19"7.5"+34 to +44

Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2001-2006 Mazda Tribute. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

DX

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

LX, ES, i, s

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2001-2006 Mazda Tribute?

The 2001-2006 Mazda Tribute uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2001-2006 Mazda Tribute from the factory?

Factory sizes: 16x6.5 +50; 16x7 +45; 17x7 +45; 17x7.5 +42; 17x7.5 +45; 18x7.5 +42; 18x8 +38.

What lug thread size does the 2001-2006 Mazda Tribute use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2001-2006 Mazda Tribute without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.