Mercedes-Benz CLA (C117) 2014-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLA built from 2014 to 2019 (CLA250, CLA250 4MATIC, CLA45 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2014-2019
GenerationC117

Every 2014-2019 Mercedes-Benz CLA uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz CLA (C117) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
CLA2502014-201917x6.5 +49
17x7.5 +52.5
18x7.5 +52
18x8 +48
18x8 +50.5
19x7.5 +49
19x8 +48
19x9 +45
CLA250 4MATIC2014-2019See factory sizes below
CLA45 AMG2014-201918x8 +48
18x8 +48 front / 18x8.5 +48 rear
19x8 +48
19x8 +45 front / 19x9 +45 rear

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2014-2019 Mercedes-Benz CLA from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +47
16x6.5 +49
17x6.5 +49
17x7.5 +52.5
18x7.5 +52
18x7.5 +52 front / 18x8 +50.5 rear
18x8 +48
18x8 +50.5
18x8.5 +48
19x7.5 +50
19x7.5 +50 front / 19x8.5 +50 rear
19x8 +45
19x8 +48
19x8.5 +45
19x8.5 +50
19x9 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2019 Mercedes-Benz CLA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

CLA250

DiameterWidthFront offsetRear offset
17-19"6.5"+12 to +59+12 to +59
17-19"7"+18 to +65+18 to +65
17-19"7.5"+25 to +60+25 to +62
17-19"8"+31 to +53+31 to +56
17-19"8.5"+37 to +47+37 to +50

Wider still: 17x9.5 front +29 to +40 / rear +29 to +43; 17x10 front — / rear +36 to +37; 18x9.5 front +29 to +40 / rear +29 to +43; 18x10 front — / rear +36 to +37; 19x9.5 front +29 to +40 / rear +29 to +43; 19x10 front — / rear +36 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CLA250 4MATIC

DiameterWidthFront offsetRear offset
16-19"6.5"+12 to +59+12 to +59
16-19"7"+18 to +65+18 to +65
16-19"7.5"+25 to +60+25 to +62
16-19"8"+31 to +53+31 to +56
16-19"8.5"+37 to +47+37 to +50

Wider still: 16x9.5 front +29 to +40 / rear +29 to +43; 16x10 front — / rear +36 to +37; 17x9.5 front +29 to +40 / rear +29 to +43; 17x10 front — / rear +36 to +37; 18x9.5 front +29 to +40 / rear +29 to +43; 18x10 front — / rear +36 to +37… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CLA45 AMG

DiameterWidthFront offsetRear offset
18-19"8"+31 to +53+31 to +56
18-19"8.5"+37 to +47+37 to +50

Wider still: 18x9.5 front +29 to +40 / rear +29 to +43; 18x10 front — / rear +36 to +37; 19x9.5 front +29 to +40 / rear +29 to +43; 19x10 front — / rear +36 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2019 Mercedes-Benz CLA. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

CLA250

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CLA250 4MATIC

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CLA45 AMG

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2014-2019 Mercedes-Benz CLA?

The 2014-2019 Mercedes-Benz CLA (C117) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2014-2019 Mercedes-Benz CLA from the factory?

Factory sizes: 15x6.5 +47; 16x6.5 +49; 17x6.5 +49; 17x7.5 +52.5; 18x7.5 +52; 18x7.5 +52 front / 18x8 +50.5 rear; 18x8 +48; 18x8 +50.5; 18x8.5 +48; 19x7.5 +50; 19x7.5 +50 front / 19x8.5 +50 rear; 19x8 +45; 19x8 +48; 19x8.5 +45; 19x8.5 +50; 19x9 +45.

What lug thread size does the 2014-2019 Mercedes-Benz CLA use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2014-2019 Mercedes-Benz CLA without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.