Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLA built from 2020 to 2026 (CLA250, CLA250 4MATIC, AMG CLA35, AMG CLA45, CLA250, CLA250 4MATIC, AMG CLA35, AMG CLA45 S).
Every 2020-2026 Mercedes-Benz CLA uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz CLA (C118) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CLA250 | 2020-2025 | 17x6.5 +44 18x7.5 +49 19x7.5 +49 |
| CLA250 4MATIC | 2020-2025 | 17x6.5 +44 17x7 +45 17x7.5 +45 18x7.5 +49 19x7.5 +49 19x8 +45 |
| AMG CLA35 | 2020-2025 | See factory sizes below |
| AMG CLA45 | 2021-2023 | See factory sizes below |
| CLA250 | 2026 | 17x6.5 +44 18x7.5 +49 19x7.5 +49 |
| CLA250 4MATIC | 2026 | 17x6.5 +44 17x7 +45 17x7.5 +45 18x7.5 +49 19x7.5 +49 19x8 +45 |
| AMG CLA35 | 2026 | See factory sizes below |
| AMG CLA45 S | 2026 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2020-2026 Mercedes-Benz CLA from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +44 |
| 17x6.5 +44 |
| 17x7 +45 |
| 17x7.5 +45 |
| 18x7.5 +49 |
| 19x7.5 +49 |
| 19x8 +45 |
| 19x8 +49 |
Widths and offsets with Verified Fitment on the 2020-2026 Mercedes-Benz CLA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 6.5" | +19 to +54 |
| 17-20" | 7" | +25 to +60 |
| 17-20" | 7.5" | +32 to +54 |
| 17-20" | 8" | +38 to +48 |
Wider still: 17x9 +30 to +41; 18x9 +30 to +41; 19x9 +30 to +41; 20x9 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6.5" | +19 to +54 |
| 16-20" | 7" | +25 to +60 |
| 16-20" | 7.5" | +32 to +54 |
| 16-20" | 8" | +38 to +48 |
Wider still: 16x9 +30 to +41; 17x9 +30 to +41; 18x9 +30 to +41; 19x9 +30 to +41; 20x9 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Mercedes-Benz CLA. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












The 2020-2026 Mercedes-Benz CLA (C118) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 16x6.5 +44; 17x6.5 +44; 17x7 +45; 17x7.5 +45; 18x7.5 +49; 19x7.5 +49; 19x8 +45; 19x8 +49.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.