Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLS-Class built from 2006 to 2011 (CLS500, CLS550, CLS55 AMG, CLS63 AMG).
Every 2006-2011 Mercedes-Benz CLS-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz CLS-Class (C219) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CLS500 | 2006 | 18x8.5 +28 18x8.5 +25 front / 18x9.5 +28 rear 18x8.5 +28 front / 18x8.5 +18 rear 18x8.5 +28 front / 18x9.5 +33 rear |
| CLS550 | 2007-2011 | 18x8.5 +18 18x8.5 +28 front / 18x8.5 +18 rear 18x8.5 +25 front / 18x9.5 +28 rear 18x8.5 +28 front / 18x9.5 +33 rear 18x9.5 +28 18x9.5 +33 19x8.5 +25 front / 19x9.5 +28 rear 19x9.5 +28 20x9 +25 front / 20x10 +25 rear 20x10 +25 |
| CLS55 AMG | 2006 | See factory sizes below |
| CLS63 AMG | 2007-2011 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2006-2011 Mercedes-Benz CLS-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8.5 +28 front / 17x8.5 +18 rear |
| 17x8.5 +28 |
| 18x8.5 +18 |
| 18x8.5 +28 front / 18x8.5 +18 rear |
| 18x8.5 +28 |
| 18x8.5 +25 front / 18x9.5 +28 rear |
| 18x8.5 +28 front / 18x9.5 +33 rear |
| 18x9.5 +28 |
| 18x9.5 +33 |
| 19x8.5 +25 front / 19x9.5 +28 rear |
| 19x9.5 +28 |
| 20x9 +25 front / 20x10 +25 rear |
| 20x10 +25 |
Widths and offsets with Verified Fitment on the 2006-2011 Mercedes-Benz CLS-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-19" | 8.5" | +1 to +33 | -2 to +38 |
| 18-19" | 9" | +7 to +27 | +4 to +44 |
| 18-19" | 9.5" | +14 to +21 | +11 to +38 |
| 18-19" | 10" | — | +17 to +32 |
| 18-19" | 10.5" | — | +24 to +26 |
Wider still: 18x11 front — / rear +9 to +25; 18x11.5 front — / rear +16 to +19; 19x11 front — / rear +9 to +25; 19x11.5 front — / rear +16 to +19 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8.5" | +1 to +28 | -2 to +28 |
| 18-20" | 9" | +7 to +27 | +4 to +34 |
| 18-20" | 9.5" | +14 to +21 | +11 to +38 |
| 18-20" | 10" | — | +17 to +32 |
| 18-20" | 10.5" | — | +24 to +26 |
Wider still: 18x11 front — / rear +9 to +25; 18x11.5 front — / rear +16 to +19; 19x11 front — / rear +9 to +25; 19x11.5 front — / rear +16 to +19; 20x11 front — / rear +9 to +25; 20x11.5 front — / rear +16 to +19 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 8.5" | +1 to +33 | -2 to +28 |
| 17-19" | 9" | +7 to +27 | +4 to +34 |
| 17-19" | 9.5" | +14 to +21 | +11 to +38 |
| 17-19" | 10" | — | +17 to +32 |
| 17-19" | 10.5" | — | +24 to +26 |
Wider still: 17x11 front — / rear +9 to +25; 17x11.5 front — / rear +16 to +19; 18x11 front — / rear +9 to +25; 18x11.5 front — / rear +16 to +19; 19x11 front — / rear +9 to +25; 19x11.5 front — / rear +16 to +19 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2006-2011 Mercedes-Benz CLS-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.





Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)














Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)









The 2006-2011 Mercedes-Benz CLS-Class (C219) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x8.5 +28 front / 17x8.5 +18 rear; 17x8.5 +28; 18x8.5 +18; 18x8.5 +28 front / 18x8.5 +18 rear; 18x8.5 +28; 18x8.5 +25 front / 18x9.5 +28 rear; 18x8.5 +28 front / 18x9.5 +33 rear; 18x9.5 +28; 18x9.5 +33; 19x8.5 +25 front / 19x9.5 +28 rear; 19x9.5 +28; 20x9 +25 front / 20x10 +25 rear; 20x10 +25.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.