Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLS-Class built from 2019 to 2023 (CLS450 4MATIC, AMG CLS53).
Every 2019-2023 Mercedes-Benz CLS-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz CLS-Class (C257) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CLS450 4MATIC | 2019-2023 | See factory sizes below |
| AMG CLS53 | 2019-2023 | 19x8 +10 front / 19x9 +28 rear 19x8 +33 front / 19x9 +28 rear 20x8 +10 front / 20x9 +28 rear 20x8 +33 front / 20x9 +28 rear |
Wheel sizes Mercedes-Benz fitted to the 2019-2023 Mercedes-Benz CLS-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +33 |
| 18x8 +33 front / 18x9 +33 rear |
| 18x9 +33 |
| 19x8 +33 |
| 19x8 +33 front / 19x9 +33 rear |
| 19x8 +33 front / 19x9 +28 rear |
| 19x9 +28 |
| 19x9 +33 |
| 20x8 +33 front / 20x9 +28 rear |
| 20x8 +33 front / 20x9 +33 rear |
| 20x9 +28 |
| 20x9 +33 |
Widths and offsets with Verified Fitment on the 2019-2023 Mercedes-Benz CLS-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | -2 to +43 | — |
| 18-20" | 8.5" | +5 to +45 | — |
| 18-20" | 9" | +11 to +38 | +11 to +38 |
| 18-20" | 9.5" | +17 to +32 | +17 to +32 |
| 18-20" | 10" | +24 to +26 | +24 to +26 |
Wider still: 18x10.5 front +9 to +25 / rear +9 to +25; 18x11 front +15 to +19 / rear +15 to +19; 19x10.5 front +9 to +25 / rear +9 to +25; 19x11 front +15 to +19 / rear +15 to +19; 20x10.5 front +9 to +25 / rear +9 to +25; 20x11 front +15 to +19 / rear +15 to +19 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-20" | 8" | -2 to +20 | — |
| 19-20" | 8.5" | +5 to +26 | — |
| 19-20" | 9" | +11 to +33 | +11 to +38 |
| 19-20" | 9.5" | +17 to +32 | +17 to +32 |
| 19-20" | 10" | +24 to +26 | +24 to +26 |
Wider still: 19x10.5 front +9 to +25 / rear +9 to +25; 19x11 front +15 to +19 / rear +15 to +19; 20x10.5 front +9 to +25 / rear +9 to +25; 20x11 front +15 to +19 / rear +15 to +19 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2023 Mercedes-Benz CLS-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.









Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)







Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)




The 2019-2023 Mercedes-Benz CLS-Class (C257) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +33; 18x8 +33 front / 18x9 +33 rear; 18x9 +33; 19x8 +33; 19x8 +33 front / 19x9 +33 rear; 19x8 +33 front / 19x9 +28 rear; 19x9 +28; 19x9 +33; 20x8 +33 front / 20x9 +28 rear; 20x8 +33 front / 20x9 +33 rear; 20x9 +28; 20x9 +33.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.