Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz E-Class Coupe built from 2018 to 2023 (E400, E450, AMG E53).
Every 2018-2023 Mercedes-Benz E-Class Coupe uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz E-Class Coupe (C238) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| E400 | 2018 | 18x8 +43 18x9 +49 18x9 +53 19x8 +43 19x9 +49 19x9 +53 20x9 +49 20x9 +53 |
| E450 | 2019-2023 | 18x8 +34 18x8 +43 18x9 +49 18x9 +53 19x8 +43 19x9 +49 19x9 +53 20x9 +49 20x9 +53 |
| AMG E53 | 2019-2023 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2018-2023 Mercedes-Benz E-Class Coupe from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +40 |
| 18x8 +34 |
| 18x8 +43 |
| 18x8 +43 front / 18x9 +53 rear |
| 18x8 +43 front / 18x9 +49 rear |
| 18x9 +49 |
| 18x9 +53 |
| 19x8 +43 |
| 19x8 +43 front / 19x9 +53 rear |
| 19x8 +43 front / 19x9 +49 rear |
| 19x9 +49 |
| 19x9 +53 |
| 20x8 +43 front / 20x9 +53 rear |
| 20x8 +43 front / 20x9 +49 rear |
| 20x9 +49 |
| 20x9 +53 |
Widths and offsets with Verified Fitment on the 2018-2023 Mercedes-Benz E-Class Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +23 to +53 | +19 to +53 |
| 18-20" | 8.5" | +30 to +59 | +26 to +59 |
| 18-20" | 9" | +36 to +58 | +32 to +58 |
| 18-20" | 9.5" | +42 to +52 | +38 to +52 |
| 18-20" | 10" | — | +45 to +46 |
Wider still: 18x10.5 front +34 to +45 / rear +30 to +45; 18x11 front — / rear +36 to +39; 19x10.5 front +34 to +45 / rear +30 to +45; 19x11 front — / rear +36 to +39; 20x10.5 front +34 to +45 / rear +30 to +45; 20x11 front — / rear +36 to +39 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +23 to +44 | +19 to +44 |
| 18-20" | 8.5" | +30 to +50 | +26 to +50 |
| 18-20" | 9" | +36 to +57 | +32 to +57 |
| 18-20" | 9.5" | +42 to +52 | +38 to +52 |
| 18-20" | 10" | — | +45 to +46 |
Wider still: 18x10.5 front +34 to +45 / rear +30 to +45; 18x11 front — / rear +36 to +39; 19x10.5 front +34 to +45 / rear +30 to +45; 19x11 front — / rear +36 to +39; 20x10.5 front +34 to +45 / rear +30 to +45; 20x11 front — / rear +36 to +39 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-20" | 7.5" | +17 to +50 | +13 to +50 |
| 17-20" | 8" | +23 to +56 | +19 to +56 |
| 17-20" | 8.5" | +30 to +63 | +26 to +63 |
| 17-20" | 9" | +36 to +58 | +32 to +58 |
| 17-20" | 9.5" | +42 to +52 | +38 to +52 |
| 17-20" | 10" | — | +45 to +46 |
Wider still: 17x10.5 front +34 to +45 / rear +30 to +45; 17x11 front — / rear +36 to +39; 18x10.5 front +34 to +45 / rear +30 to +45; 18x11 front — / rear +36 to +39; 19x10.5 front +34 to +45 / rear +30 to +45; 19x11 front — / rear +36 to +39… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2018-2023 Mercedes-Benz E-Class Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)






















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)






















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)










The 2018-2023 Mercedes-Benz E-Class Coupe (C238) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +40; 18x8 +34; 18x8 +43; 18x8 +43 front / 18x9 +53 rear; 18x8 +43 front / 18x9 +49 rear; 18x9 +49; 18x9 +53; 19x8 +43; 19x8 +43 front / 19x9 +53 rear; 19x8 +43 front / 19x9 +49 rear; 19x9 +49; 19x9 +53; 20x8 +43 front / 20x9 +53 rear; 20x8 +43 front / 20x9 +49 rear; 20x9 +49; 20x9 +53.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.