Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLA built from 2015 to 2020 (GLA250, GLA250 4MATIC, AMG GLA45).
Every 2015-2020 Mercedes-Benz GLA uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLA (X156) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLA250 | 2016-2020 | 17x6.5 +38 18x6.5 +38 18x7 +46 19x8 +43.5 |
| GLA250 4MATIC | 2015-2020 | See factory sizes below |
| AMG GLA45 | 2015-2019 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2015-2020 Mercedes-Benz GLA from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x6.5 +38 |
| 18x6.5 +38 |
| 18x7 +46 |
| 19x8 +43.5 |
Widths and offsets with Verified Fitment on the 2015-2020 Mercedes-Benz GLA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 6.5" | +21 to +48 |
| 17-20" | 7" | +27 to +51 |
| 17-20" | 7.5" | +34 to +45 |
Wider still: 17x8.5 +26 to +38; 17x9 +32; 18x8.5 +26 to +38; 18x9 +32; 19x8.5 +26 to +38; 19x9 +32… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2020 Mercedes-Benz GLA. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2015-2020 Mercedes-Benz GLA (X156) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x6.5 +38; 18x6.5 +38; 18x7 +46; 19x8 +43.5.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.