Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLA built from 2021 to 2026.
Every 2021-2026 Mercedes-Benz GLA uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLA (H247) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLA 250 | 2021-2026 | 17x6.5 +44 17x7 +44 18x7.5 +53 19x7.5 +53 20x8 +48 |
Wheel sizes Mercedes-Benz fitted to the 2021-2026 Mercedes-Benz GLA from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x6.5 +44 |
| 17x7 +44 |
| 18x6.5 +44 |
| 18x7.5 +53 |
| 19x7.5 +53 |
| 20x8 +48 |
Widths and offsets with Verified Fitment on the 2021-2026 Mercedes-Benz GLA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 6.5" | +23 to +54 |
| 17-20" | 7" | +29 to +60 |
| 17-20" | 7.5" | +36 to +58 |
| 17-20" | 8" | +42 to +52 |
Wider still: 17x9 +34 to +45; 18x9 +34 to +45; 19x9 +34 to +45; 20x9 +34 to +45 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 Mercedes-Benz GLA. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2021-2026 Mercedes-Benz GLA (H247) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x6.5 +44; 17x7 +44; 18x6.5 +44; 18x7.5 +53; 19x7.5 +53; 20x8 +48.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.