Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLC built from 2016 to 2022 (GLC300, GLC300 4MATIC, GLC350e, AMG GLC43, AMG GLC63).
Every 2016-2022 Mercedes-Benz GLC uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLC (X253) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLC300 | 2016-2022 | 17x7.5 +36 18x8 +38 19x8 +38 19x9 +20 20x8.5 +40 20x9.5 +22 |
| GLC300 4MATIC | 2016-2022 | 18x8 +38 19x8 +38 19x9 +20 20x8.5 +40 20x9.5 +22 |
| GLC350e | 2018-2019 | 18x8 +38 19x8 +38 19x9 +20 20x8.5 +40 20x9.5 +22 |
| AMG GLC43 | 2017-2022 | See factory sizes below |
| AMG GLC63 | 2018-2022 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2016-2022 Mercedes-Benz GLC from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +36 |
| 18x8 +38 |
| 19x8 +38 |
| 19x8 +38 front / 19x9 +20 rear |
| 19x8.5 +40 |
| 19x9 +20 |
| 20x8.5 +40 |
| 20x8.5 +40 front / 20x9.5 +22 rear |
| 20x9.5 +22 |
Widths and offsets with Verified Fitment on the 2016-2022 Mercedes-Benz GLC: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 7.5" | +15 to +46 | -16 to +46 |
| 17-21" | 8" | +21 to +43 | -10 to +43 |
| 17-21" | 8.5" | +27 to +37 | -3 to +37 |
| 17-21" | 9" | — | +3 to +31 |
| 17-21" | 9.5" | — | +9 to +24 |
| 17-21" | 10" | — | +16 to +18 |
Wider still: 17x10.5 front — / rear +1 to +18; 17x11 front — / rear +7 to +11; 18x10.5 front — / rear +1 to +18; 18x11 front — / rear +7 to +11; 19x10.5 front — / rear +1 to +18; 19x11 front — / rear +7 to +11… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +21 to +43 | -10 to +43 |
| 18-21" | 8.5" | +27 to +37 | -3 to +37 |
| 18-21" | 9" | — | +3 to +31 |
| 18-21" | 9.5" | — | +9 to +24 |
| 18-21" | 10" | — | +16 to +18 |
Wider still: 18x10.5 front — / rear +1 to +18; 18x11 front — / rear +7 to +11; 19x10.5 front — / rear +1 to +18; 19x11 front — / rear +7 to +11; 20x10.5 front — / rear +1 to +18; 20x11 front — / rear +7 to +11… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2022 Mercedes-Benz GLC. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)
The 2016-2022 Mercedes-Benz GLC (X253) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +36; 18x8 +38; 19x8 +38; 19x8 +38 front / 19x9 +20 rear; 19x8.5 +40; 19x9 +20; 20x8.5 +40; 20x8.5 +40 front / 20x9.5 +22 rear; 20x9.5 +22.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.