Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLC built from 2023 to 2026 (GLC 300, GLC 300 4MATIC, GLC 350 e 4MATIC).
Every 2023-2026 Mercedes-Benz GLC uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLC (X254) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLC 300 | 2023-2026 | 18x8 +32 18x8 +32 front / 18x9 +30 rear 19x8 +32 19x8 +32 front / 19x9 +30 rear 20x8.5 +34 20x8.5 +34 front / 20x9.5 +35 rear |
| GLC 300 4MATIC | 2023-2026 | 18x8 +32 18x8 +32 front / 18x9 +30 rear 19x8 +32 19x8 +32 front / 19x9 +30 rear 20x8.5 +34 20x8.5 +34 front / 20x9.5 +35 rear |
| GLC 350 e 4MATIC | 2023-2026 | 18x8 +32 front / 18x9 +30 rear 19x8 +32 front / 19x9 +30 rear 20x8.5 +34 front / 20x9.5 +35 rear |
Wheel sizes Mercedes-Benz fitted to the 2023-2026 Mercedes-Benz GLC from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +32 |
| 18x8 +32 front / 18x9 +30 rear |
| 19x8 +32 |
| 19x8 +32 front / 19x9 +30 rear |
| 20x8.5 +34 |
| 20x8.5 +34 front / 20x9.5 +35 rear |
Widths and offsets with Verified Fitment on the 2023-2026 Mercedes-Benz GLC: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +15 to +37 | +0 to +42 |
| 18-20" | 8.5" | +21 to +31 | +7 to +42 |
| 18-20" | 9" | — | +13 to +35 |
| 18-20" | 9.5" | — | +19 to +29 |
Wider still: 18x10.5 front — / rear +11 to +22; 19x10.5 front — / rear +11 to +22; 20x10.5 front — / rear +11 to +22 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +15 to +37 | — |
| 18-20" | 8.5" | +21 to +31 | — |
| 18-20" | 9" | — | +13 to +35 |
| 18-20" | 9.5" | — | +19 to +29 |
Wider still: 18x10.5 front — / rear +11 to +22; 19x10.5 front — / rear +11 to +22; 20x10.5 front — / rear +11 to +22 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Mercedes-Benz GLC. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)













Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2023-2026 Mercedes-Benz GLC (X254) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +32; 18x8 +32 front / 18x9 +30 rear; 19x8 +32; 19x8 +32 front / 19x9 +30 rear; 20x8.5 +34; 20x8.5 +34 front / 20x9.5 +35 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.