Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLE built from 2016 to 2019 (GLE300d, GLE350, GLE350 4MATIC, GLE400 4MATIC, AMG GLE43, AMG GLE63 S).
Every 2016-2019 Mercedes-Benz GLE uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLE (W166) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLE300d | 2016 | 17x7.5 +53 18x8 +56 19x8 +56 19x8.5 +59 19x8.5 +62 20x9 +57 21x9 +53 |
| GLE350 | 2016-2019 | 18x8 +56 19x8 +56 19x8.5 +59 19x8.5 +62 20x9 +57 21x9 +53 21x10 +46 |
| GLE350 4MATIC | 2016-2019 | See factory sizes below |
| GLE400 4MATIC | 2016-2019 | See factory sizes below |
| AMG GLE43 | 2017-2019 | See factory sizes below |
| AMG GLE63 S | 2016-2019 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2016-2019 Mercedes-Benz GLE from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +53 |
| 18x8 +56 |
| 19x8 +56 |
| 19x8.5 +56 |
| 19x8.5 +59 |
| 19x8.5 +62 |
| 20x9 +57 |
| 21x9 +53 |
| 21x10 +46 |
Widths and offsets with Verified Fitment on the 2016-2019 Mercedes-Benz GLE: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-21" | 7.5" | +29 to +63 |
| 17-21" | 8" | +35 to +69 |
| 17-21" | 8.5" | +42 to +64 |
| 17-21" | 9" | +48 to +58 |
Wider still: 17x10 +40 to +51; 18x10 +40 to +51; 19x10 +40 to +51; 20x10 +40 to +51; 21x10 +40 to +51 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 8" | +35 to +66 |
| 18-21" | 8.5" | +42 to +64 |
| 18-21" | 9" | +48 to +58 |
Wider still: 18x10 +40 to +51; 19x10 +40 to +51; 20x10 +40 to +51; 21x10 +40 to +51 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2019 Mercedes-Benz GLE. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)



















Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2016-2019 Mercedes-Benz GLE (W166) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +53; 18x8 +56; 19x8 +56; 19x8.5 +56; 19x8.5 +59; 19x8.5 +62; 20x9 +57; 21x9 +53; 21x10 +46.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.